AGA ATC2DFLEM Guía de instalación descargar pdf (Pagina 8)

REMOVAL FROM PALLET AND COOKER INSTALLATION

Fig. 5 DESN 517179

Appliance can now be pushed back on its wheels into

desired position.

NOTE: Care must be taken not to trap mains cable.

Fig. 6 DESN 516895

Levelling of appliance - Use

/2” (13mm) socket to

adjust wheel mechanism for FINE adjustment on both

sides at rear of the appliance.

Using a

/2” (13mm) open end spanner, feet can be

adjusted at front to make FINE adjustments to the front

of the appliance and to provide a brake for the wheels.

Turning the bolt clockwise will lower the wheel thus

increasing height of the cooker.

Anti-clockwise lifts the wheels and lowers the cooker.

Fig. 7 DESN 516897

Fitting magnetic plinth

FRONT PLINTH

COVER FITS

OVER SIDE SKIRTS

MAKE SURE SIDE

PLINTH SKIRTS ARE

LOCATED IN FRONT

GUIDE BRACKET

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Sin comentarios

AGA ATC2DFLEM Guía de instalación Pagina 8